Mouse Ceramic Studio is currently offering firing services to all. We charge $0.04 per cubic inch to fire in a community firing. (Except for members), each time the work is fired, it must be paid for. Measure your piece with an inch ruler or measuring tape, you will need the length, the width, and the height, the length is the longest dimension of your piece (usually) from side to side, the width is usually front to back, and the height is the measurement from top to bottom or how tall it is. Each measurement needs to multiplied by the next so length x width x height. This will give you the cubic inches of the piece; take that amount and multiply by 0.04 to get your dollar amount. For example, a cup with handle that is 6x4x4 is 96 cubic inches; 96 x 0.04 = 3.84 so the total for this mug would be $3.84 per firing or $7.68 for bisque and glaze firing. Members only pay for bisque firings and glaze is included as a courtesy and benefit of membership.
All Categories
- Plastruct Fineline Styrene
- Acrylic Plastic Shapes
- Round Tubes
- Round Rods (Clear)
- Round Rods (Fluorescent)
- Round Rods (Metallic)
- Round Rods (Opaque)
- Round Rods (Transparent)
- Square & Rectangular Tubes
- Square Rods
- Spiral & Half Rods
- Balls, Blocks & Cubes
- Angles, Channels & Tees
- I-Beams & H-Columns
- Structural Web & Flange
- Variable System
- Dished Heads
- Hemispherical Domes
- Elliptical Domes
- Fluorescent Rings
- Fluorescent Sheets
- Saddles
- Acrylic Accessories
- Butyrate Tube & Fittings
- Coloured Butyrate Tube
- Brass Insert Wire
- 90 Degree Small Bends
- 90 Degree Medium Bends
- 90 Degree 3 Diameter Bends
- 90 Degree 5 Diameter Bends
- 90 Degree Female Bends
- 45 Degree Bends
- 45 Degree Female Bends
- Tees
- Snap-on-Tees
- Stub-on-Tees (90 Degrees)
- Stub-on-Tees (45 Degrees)
- Concentric Reducers
- Eccentric Reducers
- Coupling Sleeves
- Coupling Pins
- Sleeves/Hinges
- Tube Caps
- Flanges
- Discs
- Support Clips
- Support Flanges
- Values
- Half Round Channel
- Manways
- ABS Tubes & Fittings
- ABS Plastic
- Sheet Materials
- Scenic Materials
- Scale Representation
- Materials
- Mechanisms
- DC Motors & Gearboxes
- Toothed Pulleys & Belts
- Plastic Gears & Pulleys
- Brass Gear Wheels
- Plastic Sprocket Chains
- Module-1 Gears & Accessories
- 6mm Plastic Gears & Accessories
- Nylon Joints
- Props & Rudders
- Wheels & Axles
- Perforated Steel & Aluminium
- Steel Axles and Collars
- Miniature Ballraces
- Miscellaneous
- Water Pumps and Tubes
- Moulding & Casting
- Hand Tools
- Power Tools
- Other