Moulds & Resin

These flexible moulds will allow you to create endless amounts of pavement stones valid for 1:35. Heat resistant rubber up to 240ºC Food-grade Resin-Grade Scale 1:35 (1:32-1:43) We recommend using SCRAPERS to remove the excess of putty/clay from the moulds without cutting them.

Heat resistant rubber up to 240ºC Food-grade Resin-Grade We recommend using SCRAPERS (LINK) to remove the excess of putty from the moulds without cutting them. Contains 2 moulds with 4 rivets in 5 different sizes (2'5, 2, 1'5, 1 and 0'75mm)

Heat resistant rubber up to 240ºC Food-grade Resin-Grade Scale 1:35 (1:32-1:43) Mould thickness 4mm Mould depth 2mm We recommend using SCRAPERS (LINK) to remove the excess of putty/clay from the moulds without cutting them.

The Acrylic Resin dries in 30 minutes, reaching 'ultimate hardness' in 24 hours. Gross weight: 350g Maximum exothermic temperature: 45-50ºC

USES: - As lubricant for sculpting tools or our textured rolling pins. - To smooth the finish of sculptures. - As bonding agent for polymer clays. - As conditioner for crumbled clays and putties. - To soften the natural texture of putties. - To achieve thinner layers with clays and putties. - To improve blending of clays and putties. It should be stored at room temperature. If exposed to high temperatures, it could soften. To recover its original solidity, place it for a few minutes in the refrigerator. Content: 50ml

New improved formulation that will allow you to have better details since the plastic will remain more time in soft state. This set contains 4 bars and it will last for ever. Dimension of each bar: 5.8x1.5x0.7cm Weight of each bar: 6 g

New improved formulation that will allow you to have better details since the plastic will remain more time in soft state. This set contains 8 bars and it will last for ever. Dimension of each bar: 5.8x1.5x0.7cm Weight of each bar: 6 g

Heat resistant rubber up to 240ºC Food-grade and Resin-Grade We recommend using liquid Resins. Other putties such as milliput, milliput mixed with plasteline, magic sculpt or similars may also work, but because of the depth of the bricks in the pattern, they will need a bit of help when filling them in. We recommend using SCRAPERS to remove the excess of putty/clay from the moulds without cutting them.

These moulds are heat resistant up to 240ºC and very durable. Dimensions: 20mm 25mm 40mm 50mm 25x50mm Height: 10mm

These moulds are heat resistant up to 240ºC and very durable. Dimensions: 60x35mm 75x42mm 90x52mm 105x70mm 70x25mm Height: 10mm