Alumilite Casting Products
Welcome to the exciting world of Alumilite, the two part casting plastic that goes from liquid to solid in 3 minutes:: Allumilite is easy to use, virtually odourless, and will duplicate almost any part, down to the most minute detail. There are no complicated mixing ratios, just mix equal amounts of parts A and B, and pour into your mould. Three minutes later you will have a faithful copy of your original item. BUT..... the magic of Allumilite does not end there. Alumilite can be painted (with the minimum of preparation), machined with normal high speed tools, and can be reformed or bent ( when heated). To make the decorating process even easier, Alumilite can be dyed.. To increase the volume, or change the weight or texture of the casting, DRY fillers may be added. Suitable items listed below. Not recommended for use by persons under 14 years of age without supervision:
-
-
-
Aluminium Powder£11.25Helps stop shrinkage of your casting. Also gives aluminium look to your cast pieces.
-
-
Modelling Clay£1.63A non hardening clay used during the mould making process. Can also be used for "one off" castings.
-
Porcelain Powder£9.00Mix with WHITE Alumilite to produce a Cold Cast Porcelain look to your castings.
-